“Alkaline surface cleaner and grease remover for the entire kitchen area. Removes organic soiling such as oils, greases, proteins and dried-on food residues from porcelain stoneware, tiles, fittings, glass, ceramics and other alkali-resistant surfaces. Economical to use. Cleans automatically and leaves a pleasant hygienic fresh scent. Suitable for automatic machines. Particularly effective on non-slip, microporous porcelain stoneware tiles. Application \/ dosage: Maintenance cleaning: Dilute 1 – 2% (80 – 160 ml\/8 liters of water). Basic cleaning: Dilute 3 – 4% (240 – 320 ml\/8 liters of water). For heavier soiling, increase the dosage and then wipe with clear water. NOTE: Ensure that the materials are alkali-resistant. After cleaning with Alkaline Power Cleaner, wipe food-contact surfaces with clean water. Check material compatibility in an inconspicuous place. Intermittent cleaning with the acidic power cleaner is recommended! Ingredient specification < 5% phosphates, non-ionic surfactants. Other ingredients: fragrances. Technical data Consistency: liquid Odor: product-specific pH value: 11-11.5 Density: 1.05 g\/cm\u00b3 Storage instructions Store frost-free. Can be used for at least 2 years if stored properly.\" \"Signal word: CAUTION Hazard statement: H319 Causes serious eye irritation. Precautionary statements: P101 If medical advice is needed, have product container or label at hand. P102 Keep out of the reach of children. P280 Wear protective gloves and eye\/face protection. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove any contact lenses if possible. Continue rinsing. P337+P313 If eye irritation persists: Get medical advice\/attention. Additional information: The substances in the mixture do not meet the PBT\/vPvB criteria according to REACH, annex XIII.\"\n<\/p>\n","protected":false},"excerpt":{"rendered":"